|
This weatherproof
wireless security camera
system with audio can be setup in minutes. Just mount the cameras where
you want, and plug in the power. Plug in the cable from the receiver to
your TV inputs. Turn in on and push the AUTO button. The receiver will
scan through the cameras with 3 seconds on each one. You can also push the
channel button of any camera to go right there.
Another great feature of this
wireless camera system is the receiver has a separate audio and video output for each
channel. That means you could run the output of each channel into a DVR or
quad processor for simultaneous viewing and recording. Most wireless
systems would require a separate receiver for each channel.
The Night Vision CMOS wireless cameras
have 12 Infra-Red LED’s for 25 to 30 feet
illumination in complete darkness. If further illumination is required you
can use additional IR illuminators or
provide more ambient light. The LED's turn on automatically when the light gets too low
and shuts off automatically when their is plenty of light for the camera.
The Cameras come with a pan/tilt mount that can be simply set in place or
securely mounted in a permanent location.
Specifications:
- CMOS Color Omniview Sensor 350
lines resolution with audio
- 300 to 500 Foot Line Of Sight Range -
Range through walls will be less, expect 80 to 150 feet depending on type.
Concrete and metal will adversely affect range the most.
- Operating frequencies:
2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz
- 60 Degrees Field of View
- 12 LED's for 25 to 30 feet
illumination
- Auto Channel Switch
- watch 4 locations
- Operating Voltage 12VDC
- Includes all cords and power
supplies
|